Huawei AP263 – Modern Access Point
Welcome to Shop Workit Online store! Get bestselling Samsung, Apple, Xiaomi Smartphones and More. Get the best value for your money when you buy online. Explore a vast array of categories, encompassing electronics, computing, televisions, smartphones, and more.
High-Quality Connection with Huawei AP263
With its dual-band operation, Huawei AP263 can support both 2.4 GHz and 5 GHz, offering maximum speeds of up to 575 Mbps and 2.4 Gbps respectively. This combination enables a total speed of 2.975 Gbps. The device comes with 1 x GE ports, allowing for flexible network configurations. Thanks to various installation modes, such as wall or plate mounting, and built-in smart antennas, the AP263 provides precise signal coverage, minimizing interference and maximizing signal quality.
Advanced Technologies in Huawei AP263
Huawei AP263 represents the latest generation of Wi-Fi standards – operating under Wi-Fi 6 (802.11ax). The device is optimized for environments with multiple parallel signals. It excels in areas where different networks or devices operate simultaneously across both frequency bands. Its key technologies, such as MU-MIMO and 1024-QAM, enable efficient operation under the most demanding conditions, ensuring high-quality connections for multiple users.
Security and Optimization with Huawei
Huawei prioritizes the highest security standards. With advanced technologies, such as user authentication and encryption for wireless access, monitoring of unauthorized devices, and additional security features for wired access to the access point, users can be assured that their data is protected at every stage of transmission.
Cloud-Based Management with Huawei Cloud
Huawei AP263 allows network management through the cloud, eliminating the need for deploying additional authentication servers or WLAN AC. In cloud management mode, users have access to advanced features like authentication using shared key (PSK), Portal, SMS, or social media authentication. It’s all simple to set up while ensuring high-quality connection and maximum security for users.
Overview
Table 5-56Â Basic information about the AP263
| Item | Details |
|---|---|
| Description | AP263(11ax indoor,2+2 dual bands,smart antenna,USB,BLE) |
| Part Number | 50084981 |
| Model | AP263 |
| First supported version | V200R021C01 |
Appearance
Figure 5-37Â Appearance of the AP263
Ports
Figure 5-38Â Ports on the AP263
|
1 |
GE0/PoE_IN |
2 |
GE1 |
|
3 |
USB |
4 |
DC 12V |
Table 5-57Â Ports on the AP263
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| GE0/PoE_IN | RJ45 | 10/100/1000M auto-sensing Ethernet electrical port that connects to the wired Ethernet and supports PoE input. |
Network cable |
| GE1 | RJ45 | Ethernet electrical port that supports 10/100/1000M auto-sensing and connects to the wired Ethernet |
Network cable |
| DC 12V | DC connector | Connects to a 12 V power adapter. |
12 V DC power adapter |
| USB | USB 2.0 Type A | Connects to an IoT terminal to implement IoT applications. |
IoT module |
Indicators and Buttons
Figure 5-39Â Indicators and buttons on the AP263
The indicator is located inside the panel, which turns on after the AP is powered on.
|
1 |
Indicator |
2 |
Default |
Table 5-58Â Indicators on the AP263
| Silkscreen | Name | Color | Status | Description |
|---|---|---|---|---|
| – | System indicator | Green | Steady on |
Default status after power-on. The AP is just powered on and the software is not started yet. |
| Green | Steady on after blinking once |
Software startup status. After the system is reset and starts uploading the software, the indicator blinks white once. Until the software is uploaded and started, the indicator remains steady white. |
||
| Green | Slow blinking (0.5 Hz) |
The AP is running properly, the Ethernet connection is normal, and STAs are associated with the AP. This state is supported in V200R022C00 and later versions. |
||
| Green | Slow blinking (0.2 Hz) |
The AP is running properly, and the Ethernet connection is normal. For V200R022C00 and later versions, this state also indicates that no STA is associated with the AP. |
||
| Green | Blinking once every 0.25s (4 Hz) |
Alarm.
|
||
| Red | Steady on |
Fault. A fault that affects services has occurred, such as a DRAM detection failure or system software loading failure. The fault cannot be automatically rectified and must be rectified manually. |
Table 5-59Â Buttons on the AP263
| Silkscreen | Name | Description |
|---|---|---|
| Default | Reset button |
|
Technical Specifications
Table 5-60Â Technical specifications of the AP263
| Item | Specification |
|---|---|
| Installation Type |
|
| Dimensions without packaging (H x W x D) [mm(in.)] | 160 mm x 86 mm x 38 mm (6.30 in. x 3.39 in. x 1.50 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 75 mm x 205 mm x 115 mm (2.95 in. x 8.07 in. x 4.53 in.) |
| Weight without packaging [kg(lb)] | 0.320 kg (0.705 lb) |
| Weight with packaging [kg(lb)] | 0.542 kg (1.195 lb) |
| Storage | NAND Flash 256 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 12 W |
| Maximum heat dissipation [BTU/hour] | 41 BTU/hour |
| Power supply mode |
|
| Rated input voltage [V] | 12 V |
| Input voltage range [V] |
12±10% PoE: 802.3at/af |
| Service port surge protection |
PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B |
| Maximum number of physical ports on the entire device | GE (RJ45) x 2, 10M/100M/1000M auto-sensing |
| Long-term operating temperature [°C(°F)] | 0°C to 40°C (32°F to 104°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.) |
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa – 106kPa ETSI 300 019-2-3 |
| Ground | floating ground |
| USB | USB 2.0 (supporting 5 W power supply) |
| BLE | BLE5.0 |
| Radio number | 2 |
| Operating frequency band |
|
| MIMO spatial streams |
Radio 0 (2.4 GHz): 2×2 Radio 1 (5 GHz): 2×2 |
| Wi-Fi standard |
2.4G: 802.11b/g/n/ax 5G: 802.11a/n/ac/ac Wave 2/ax |
| Radio interface | Built-in smart antennas |
| Antenna gain |
2.4G: 2 dBi/chain (peak value) 1 dBi (combined gain) 5G: 3 dBi/chain (peak value) 1 dBi (combined gain) BLE: 4 dBi |
| Maximum transmit power |
2.4G: 20 dBm/chain 23 dBm (combined power) 5G: 20 dBm/chain 23 dBm (combined power) BLE: < 10 dBm |
| Singal radio transmit power [dBm] |
2.4G: -10 dBm to 20 dBm/chain 5G: -10 dBm to 20 dBm/chain |
| MTBF [year] | 69.7 year |
| MTTR [hour] | 0.5 hour |
| Frequency stability [ppm] | +/-20 |
| 802.3at power supply description | No function is limited. |
| 802.3af power supply description | The USB function is unavailable. |
| DC power supply description | No function is limited. |
Reach us on Facebook through,
Reviews
Clear filtersThere are no reviews yet.